SkyPanel is a compact, ultra-bright and high-quality LED soft light that sets a new standard for the industry. Unlike other tuneable fixtures, SkyPanel makes no sacrifice when it comes to light output.
ARRI S60-C Skypanel LED Softlight Hire Rental London
4x Arri SP Diffusion Panels
1x Arri SP PSU
1x Arri SP Rail Mount Adapter
1x Arri SP 3-Pin XLR Cable
1x Arri SP 3-Pin XLR to 16 Amp Power Cable
1x Arri SP Daisy Chain Cable
1x Arri SP Remote
1x Arri SP FlexDoor
1x Snapbag Softbox
1x Snapgrid for Softbox
1x Arri Skypanel V-Lock Battery Plate
1x 10m 16A Extension Cable
1x 1m 13A Plug to 16A Socket Jumper
1x Flight Case
(V-Locks NOT Included, Please Ask If Required)
Optical System
Soft Diffusion Panel
Light Aperture:
645 x 300 mm / (25.4 x 11.8 inches)
Beam Angle:
110º (Half Peak Angle)
Handling:
Steel Yoke, High Strength Tilt Lock, Pole Operation Option (Pan & Tilt)
Mounting:
28 mm Spigot (Junior Pin)
Tilt Angle:
+/- 90°
Lamphead Voltage Input:
48 V DC
Power Consumption:
420 W Nominal, 450 W Maximum
White Light:
2,800K – 10,000K Continuously Variable Correlated Color Temperature
Coloured Light:
Full RBG+W Color Gamut with Hue and Saturation Control
Colour Temperature Tolerance:
+/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Colour Rendition:
CRI Average Greater 95
TLCI Average Greater 90
Green-Magenta Adjustment:
Continuously Adjustable (Full Minusgreen to Full Plusgreen)
Dimming:
0 – 100% Continuous
Control:
On-Board Controller, 5-Pin DMX In and Through,
EtherCon LAN Network Connectivity, USB-A
Remote Device Management (RDM):
DMX Setup, Hour Counter and Standard RDM Commands
USB Interface:
DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac and USB Stick
Housing Colour:
Blue/Silver, Black
Ambient Temperature Operation:
-20 to +45º C (-4 to +113º F)
Protection Class:
IP 20
Estimated LED Lifetime (L70):
50,000 hours
Estimated Colour Shift Over Lifetime:
Less than 200 K
Certifications (pending):
CE, FCC; GS, cNRTL, CB
Power Supply Input Range:
90 – 250 V AC, 50 – 60 Hz
Power Supply Output Range:
48 V DC
Power Input Connection:
powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available)
Power Output Connection: Female 3-Pin XLR – 10 Amp (Pin 1: Negative / Pin 2: Positive)
powerCON TRUE1 (mains power through)
Weight:
5 kg (11 lbs.)
Control:
On-Board On/Off Switch
Mounting:
Super Clamp Attachement / SkyPanel PSU Rail Mount
